English Chinese
Position :

Briquette Mesh Belt Dryer

The briquette mesh belt dryer uses hot air to dry and solidify the charcoal briquette in different shapes, such as shisha tablet in different shape, charcoal bars, charcoal balls and so on, and can be matched with various molding equipment, such as ball presses and briquetting machines.
Brief Introduction:

Briquette Mesh Belt Dryer is used for the drying of charcoal briquette in different shapes,Solved the problem that the granular material is brittle, difficult to dry, and low in productivity.

Salient Feature :
the material is evenly laid on the uppermost mesh belt by the feeding conveyor.
The outer wall of the box and each door panel are filled with thermal insulation material, which has better thermal insulation effect.
The running time of the material in the drying chamber (drying cycle) can be adjusted according to the water loss rate of different materials.
The entire system is controlled by an electrical control box.
Technical Data
model GX-101 GX-102 GX-103 GX-104 GX-105 GX-106 GX-107 GX-108
Mesh belt width 600mm 800mm 1000mm 1200mm 1600mm 2000mm 2400mm 3000mm
Mesh belt length 6-12m 6-12m 6-16m 8-16m 8-22m 10-26m 12-30m 12-40m
Feed port length 1m 1m 1m 1m 1m 1.5m 1.5m 2m
Transfer length 1m 1m 1m 1m 1m 1.5m 1.5m 2m
Dry area 3.6-36㎡ 4.8-48㎡ 6-80㎡ 7.2-96㎡ 12.8-105.6㎡ 20-260㎡ 28.8-360㎡ 36-600㎡
Number of layers 1-7
Layer spacing 400-600mm
Transmission capacity 90-200kg/㎡
Operating temperature Carbon steel≤400℃,stainless steel≤600℃
Evaporation intensity 5-20kg/㎡.h
Heat source natural gas,Biomass,Electricity
Transmission speed 0.06-1m/min
Transmit power 1.1-2.2kw 1.1-2.2kw 1.1-2.2kw 1.1-3kw 1.5-3kw 1.5-4kw 3-7.5kw 5-11kw
* Your name
* Email
* Message